Description

Before you chase a Danfoss OMR 32 dealer, check one thing most listings skip. The OMR orbital motors aren’t sold by Danfoss any more. The business changed hands, and that changes who can be called authorised. This guide explains what happened and how to test any seller. Advance Hydraulic Works works with hydraulic pump and motor repair and supply from Delhi NCR, and these are the questions we’d put to any seller, ourselves included. Who makes the OMR now? Danfoss acquired the White Drive Products motor business in 2016, then in 2021 set up White Drive Motors & Steering as a stand-alone unit, because it had to divest the line to get approval for its Eaton Hydraulics acquisition. Interpump Group signed a binding agreement to buy White Drive Motors & Steering from Danfoss, adding orbital motors and steering systems to its range. The OMR motors went with that business. A reseller’s product page says the motors supplied by White Drive Motors & Steering replace the OMR orbital motors produced by Danfoss, with characteristics and performance unchanged. Another reseller says the range is currently White for the OMM, OMP, OMR, OMH and OMS ranges, and Danfoss for the OMT and OMV ranges. So a seller calling itself a Danfoss distributor may not be authorised for these motors at all. It depends on which maker’s agreement they hold. What does “32” mean here? I couldn’t find a standard OMR 32. One reseller lists the OML range from 8 to 32 cm³ and the OMP range from 25 to 400 cm³, and notes that the OMR X goes from 50 upward. Another says the OMRX covers 36 to 400 cm³. There is disagreement about the exact assortment of properties, so check the state-of-the-art catalog. So a Danfoss OMR 32 is most likely a 32 cc OML or OMP, or nickname for the close-adjacent OMR X length. Read the model code from the nameplate, and make every seller quote that exact code. Danfoss OMR 32 dealer: what a dealer should show A dealer usually sells to workshops and factories, often buying from a distributor. Ask a Danfoss OMR 32 dealer: which maker supplies you, can you show it in writing, and what exactly is the model code you’re offering? “Danfoss” and “White” on the answer are both fine, but vagueness is not. Danfoss OMR 32 supplier: the widest label A Danfoss OMR 32 supplier can be any importer, trader or reseller. That’s not bad, but ask where the motor came from, whether it’s new, remanufactured or used, and who gives the warranty. Advance Hydraulic Works sits in the supplier group, and we’d rather you check us than take our word. Danfoss OMR 32 distributor: the strongest claim A distributor normally holds an appointment from the maker for a territory. Danfoss publishes an authorized partner network with a tool for finding your distributor. For the OMR line, you’d also check with White Drive Motors & Steering. If a Danfoss OMR 32 distributor can show an appointment from the right maker, that’s meaningful. If not, treat the claim as unproven. The method: maker, code, number, proof Maker. Ask whether the motor is Danfoss- or White-branded, and which agreement the seller holds. Code. Copy the full model code from the nameplate. Number. Ask for the old and new part numbers, since they changed. Proof. Ask for a plate photo of the actual unit, plus source, condition and warranty. A worked example Part numbers changed when the brand moved. A European webshop lists a White OMP X 050 as formerly known as the Danfoss orbital motor, with the previous Danfoss number 151-5051. Another lists a White OMR X 80 under reference 11185560. So an old Danfoss number and a new White number can describe the same motor. Now picture two sellers. One says “authorised Danfoss distributor” and quotes the old number. The other names the maker, gives both numbers and sends a plate photo. Testing the second is less complicated, though the primary is cheaper. Ask each the same 4 questions and compare the answers, not just the price. This is an illustrative case, not a quote Implementation steps 1. Photograph the old motor’s nameplate, shaft and flange before removal. 2. Write down the full model code, any old Danfoss number and the displacement. 3. Note the flow, pressure and speed the machine needs. 4. Send everything to Advance Hydraulic Works and at least one other seller. 5. Ask each seller which maker they buy from, in writing. 6. Ask for both the old and new part numbers, condition, source and warranty. 7. Check the maker’s partner locator if a seller claims authorisation. 8. Compare the delivered motor’s plate with your order, then fit and run it unloaded first. The usual mistakes are trusting “Danfoss distributor” for a line that has moved and ordering by nickname. FAQs Who is a Danfoss OMR 32 dealer? A provider sells to end users and regularly buys from a distributor. Ask which manufacturer does elements of it and ask for proof, due to the fact the OMR line went to White Drive Motors & Steering. What does a Danfoss OMR 32 supplier do? Provider is a looser term that includes both importers and buyers. Ask where the motor came from, its condition and who offers the warranty. How do I find a real Danfoss OMR 32 distributor? Ask for a written appointment and check it against the maker’s partner locator. For OMR motors, check with White Drive Motors & Steering as well as Danfoss. Is there a Danfoss OMR 32 motor? I couldn’t find a standard OMR 32. It’s likely a nickname for a 32 cc OML or OMP, so confirm the model code on the nameplate. Is Advance Hydraulic Works an authorised Danfoss distributor? Advance Hydraulic Works works with hydraulic pump and motor restoration and distribution. Ask at once for the source and warranty of any motor we pick up. Your next step Photograph the nameplate, write down the exact model code and send everything to Advance Hydraulic Works. Ask us the four questions above, and you’ll know what you’re buying before you spend anything.