New Delhi
08042756439
+918527109985
REXROTH HYDRAULIC PUMP by REXROTH

A10VSO 18 DFR/31R-PPA12N00

INR 141599
Phone Number

08042756439

Please keep 0 before dialling the number.

Mon-Thu: 10 AM - 2 PM • Fri: 3 PM - 7AM

Other Website Visit our other website
Address Shed no 89, Wazirpur Industrial Area

New Delhi, India, 110052

Description

A10VSO 18 DFR/31R-PPA12N00: Different pumps of the same size, type and range may be available. Within the same range, changing the letter after the hyphen will change the seals and make them compatible with your oil. This model can be specified in many ways, including: A10VSO 18 DFR/31R-PPA12N00, REXROTH R910940520 A10VSO 18 DFR /31R-PPA12N00, AXIAL PISTON PUMP A10VSO 18 DFR/31R-PPA12N00. This guide has been put together by ADVANCE HYDRAULIC WORKS to help you choose the correct build. Pump Details: A10VSO – Variable Displacement Open Circuit Axial Piston Pump 18 – Size. (18cm³/rev) (Approximately 26.1L/min at 1,450 RPM full stroke) DFR – Pressure and flow control. Load sensing function therefore a signal must be sent via to port X. 31 – Range. R – Rotation in clockwise direction. PPA12N00 – Seal type, Shaft, Flange, Ports and Through Drive. From the Rexroth Ordering Key, the first letter denotes the seal type (P = NBR, V = FKM). N00 generally means no through drive. To confirm the meaning of these designations for this specific range, please refer to the datasheet. To ensure that the seals are compatible with your oil, ADVANCE HYDRAULIC WORKS will confirm this prior to purchase. REXROTH R910940520 A10VSO 18 DFR /31R-PPA12N00: the part number R910940520 – Part Number. Rexroth material numbers will give a precise configuration to avoid confusion caused by incorrectly spaced part numbers. Before taking this for granted, confirm this matches that given on your nameplate. The VPA12N00 version of this pump is a different build. When giving a quotation it is very important that we do not confuse the two. Ask that the part number and designation be provided, and confirm they match with a photograph of the plate. If there is a mismatch between part number and designation, ADVANCE HYDRAULIC WORKS will put the order on hold. AXIAL PISTON PUMP A10VSO 18 DFR/31R-PPA12N00:Choosing P over V Build: Consider the type of oil being used and the operating temperature. If standard mineral oil is being used, and within the operating temperatures given in the datasheet for NBR seals then this build may be correct. However if the oil is hot or any other type of fluid, then the V build with FKM seals may be a safer choice. Refer to the Fluids and Temperatures section of the datasheet to confirm. Do NOT choose based on: “it's what was in stock” or “it was cheaper”. If the wrong seals are chosen for the fluid, (usually leaking at shaft), it may be months after purchase that a problem occurs. By this point, you may not even know what was originally quoted. It is better to consider the oil type rather than price. ADVANCE HYDRAULIC WORKS would prefer you ask us about the oil before asking about the price. Check List (before purchase) Confirm the designation and part number match those on the nameplate. Confirm seal type matches oil and temperature. Refer to limitations in datasheet. Confirm control. DFR requires a load sensing signal into port X. DR pumps are a different pump. Confirm drive. kW = (flow x pressure)/600. Divide by efficiency. These checks will be done on all quotes at ADVANCE HYDRAULIC WORKS including our own. Example: Plant A has a standard oil running at moderate temperatures. Let’s say maximum temperature is 55 oC. Plant B has the same oil, however regularly reaches high temperatures of approx 85 oC within the tank. Both can be quoted for. A10VSO 18 DFR/31R-PPA12N00 and VPA12N00 (Same pump, in stock). For Plant A, it is likely that the correct version will be a P build. However, double check in datasheets. For Plant B, the limits in the datasheet may require different seals to be used. FKM may be more suitable. Despite having the same size and control, it is different pumps. Drive Calculations Flow: 18 x 1450 / 1000 = 26.1L/min Power: 26.1 x 250 / 600 = 10.9kW. Shaft power: Approx 12.1kW (Assuming 90% efficiency. Double check in datasheets). As 11kW motors are too small, to be safe, select a standard 15kW motor. Implementation steps: Take a photo of the pump nameplate. Record the type of oil, grade of oil and maximum tank temperature. Check that the oil type and temperature are compatible with the sealing material in the datasheet. Check that there is a load sensing signal from the machine to the X port. Perform drive calculation above. Message 2 or 3 suppliers (including ADVANCE HYDRAULIC WORKS) requesting a quotation. Include: pump code, part number, oil details. Compare the responses. Check that the same pump code and part number is included in each response. When delivered, check the pump nameplate. Clean out the tank and pipework. Refill with clean oil in the case drain port. Increase pressure gradually from low. We recommend noting initial values in the service tag on the machine. FAQS: 1.What does this pump code mean? This is a variable displacement AXIAL PISTON pump of size 18. It has DFR controls, Series 31 and rotates clockwise. The PPA12N00 suffix means that it has seals, shaft, flange, ports and through drive. 2.Is REXROTH R910940520 A10VSO 18 DFR /31R-PPA12N00 the same pump as the VPA12N00? No. The first letter following the dash differs. This typically indicates different sealing materials. Therefore, different part numbers. 3.Is AXIAL PISTON PUMP A10VSO 18 DFR/31R-PPA12N00 suitable for high oil temperatures? It depends on the seal material. Check in the datasheet to ensure that the maximum tank temperature is compatible with the seal material before ordering. 4.Can I change the pump from a V build to a P build? Only once you have considered the oil type, operating temperature and checked that the seal material maximums in the datasheet are compatible. 5.What information do I need to provide to ADVANCE HYDRAULIC WORKS to get a quotation? Photo of pump nameplate including pump code and part number. Oil type, maximum temperature, machine model, operating pressure and motor speed. Next Step Take a photo of the nameplate on your pump. Send this to ADVANCE HYDRAULIC WORKS along with the type of oil and pressures within the system.

footerhc