Rexroth A10VSO 18 Supplier / Dealer / Distributor – The most confusing size. This is the smallest pump in the range and often the least specific. People will often say ‘an 18’, assuming the rest is correct. You will see there are multiple control types, code endings and weights listed all in the same listing. This is a great one to check! Here at Advance Hydraulic Works we are partnered with hydraulic pump repair and supply in Delhi NCR so we would ask you to check us. Pump Specifications The following specs are from a distributor. The pump 18 has a geometric displacement of 18cm³, max speed of 3300rpm (full displacement) or 3900rpm (reduced displacement). It will have a flow rate up to 59LPM (nominal speed), or 27LPM (1500rpm). It has a power of 28kW running at 280bar. With a torque of 80Nm at 280bar. It has a parallel keyed shaft to DIN 6885, a two hole flange to ISO 3019-2 and ports for SAE flange. The data sheet has additional information. The 18 will have a flange of 82-2 (A), keyed hub (K40) or hub of 5/8in (K01). Conflicting information When looking at the listings sometimes there will be conflicting information. On one page you may have a weight of 9.44kg and 12.9kg. Looking at the data sheet extracts you can see that the weight of the 18 should be 12.9kg (without through drive) or 14kg (with through drive). Having a 3.5kg difference in something that weighs 13kg means the item was not checked. Multiple control types and code endings. There are many options for this pump. DR, DFR1 or DFR controls. They will have a variety of code endings. PPA12N00 or VPA12N00. Each one will have a different material number. Some will be the same pump with a different control, some will vary. The size alone won’t tell you what you need. Rexroth A10VSO 18 supplier A supplier could be an importer, trader or reseller. This is fine. Ask them to confirm the control, code ending and weight. We are in the supplier category so ask us! A10VSO 18 pump dealer These will typically sell to workshops and factories. Often they will get their pumps from a distributor. Ask where they get their pumps from and ask them to confirm the three things. A10VSO 18 pump distributor They should have an authorisation from the manufacturer to supply to an area. Ask for the documentation and verify with the manufacturer. They should also know why one pump is a DR and one is a DFR1. Process Size:Confirm the pump is an 18 from the nameplate. Control:Confirm the pump is either a DR, DFR or DFR1. Then make sure it fits with your circuit. Code Ending:Copy the full code ending and material number. Source:Ask where the pump is from, how old it is, how much it weighs and ask for a picture of the plate. Example If your pump is running on a motor that turns at 1450rpm. Your flow rate will be 18 x 1450 / 1000 = approx 26LPM. Your hydraulic power will be 250 x 26 / 600 = approx 11kW. Your torque will be 18 x 280 / 62.8 = approx 80Nm. Which matches the data sheet. Now say you have 3 suppliers. Supplier A will have all the info. Control, code ending, material number and a weight of 12.9kg with a picture of the plate. Supplier B will have the size and say its the same as original. Supplier C will have a weight of 9.44kg. From this you can see that supplier A has all the details correct. Supplier B didn’t specify the control and supplier C’s weight is different to the data sheet. If you need a DFR1 for your circuit but supplier B sends you a DR you’ll have the correct size but incorrect behaviour. These numbers are just an example so use the current data. Implementation steps Take a picture of the pump, nameplate and ports. Write down the full type code and material number. Make a note of what speed your drive is running at, what pressure you’re working at and if it drives a second pump. Send this to Advance Hydraulic Works and at least one more supplier. Ask them to confirm the control, code ending and weight. Ask them to confirm where it is from, how old it is and what warranty it has. If they have any claims of being authorised check with the manufacturer. When you receive your pump check the plate matches what you ordered. Then install, prime and run at low pressure. Common mistakes Only matching the size. Not checking the control. Trusting the weight. FAQs What is the Rexroth A10VSO 18? The smallest pump in the range. It is a variable axial piston pump with a displacement of 18cm³ per revolution. It is designed for open circuits and can operate at 280bar nominal. How much oil will it pump? About 27LPM at 1500rpm (full displacement). How do I find a genuine A10VSO 18 pump distributor? Ask them to confirm they have an authorisation in writing and check with the manufacturer. Ask them to confirm the control and code ending. Who is a good A10VSO 18 pump dealer? They should ask for your full type code. They should be able to explain the control and through drive. If they just ask for an 18 they aren’t reading the pump. Do we take enquiries for the A10VSO 18? Yes! Send us a picture of the plate, full type code and ask us to confirm. Ask all other suppliers to confirm where it is from, how old it is and what warranty it has. What to do next Take a picture of the nameplate, copy the full type code and send to Advance Hydraulic Works. Ask us to confirm and ask all other suppliers.