Yuken PVR50-51 Vane Pump: What to Confirm Before You Order:- If the number stamped on your pump reads PVR50-F-F-51-RAA-3180, ordering the right replacement comes down to confirming a handful of specifics before you commit, not just matching the code on a listing page. Reading PVR50-F-F-51-RAA-3180:- PVR marks the series — a variable displacement, pressure-compensated vane pump. 50 is the frame size. F-F specifies shaft and port configuration. RAA covers rotation and mounting. 3180 identifies the design/revision build. Matching displacement to the machine it's fitted to:- The displacement figure — 51 in this case — determines how much oil the pump moves per revolution at full stroke, which in turn sets how much flow the machine it's fitted to is expecting. Equipment sized around this displacement typically runs a heavier or more continuous load profile than a machine built around one of the lower-displacement PVR50 variants. Swapping in a different displacement code because it “looks similar“ changes that flow output and can leave the machine under-supplied or working the pump harder than it was designed for. What to verify before buying a replacement:- Read the full part number directly off the pump housing rather than from an old purchase order or parts list — transcription errors happen more than people expect. Confirm the displacement matches your machine's original spec, not just what's printed on the failed unit if it was ever swapped previously. And get the shaft, port, and mounting details confirmed against what your machine actually needs before the order is placed. New, reconditioned, or repaired — deciding what fits your budget:_ A factory-new unit costs more but comes with the cleanest warranty and longest expected life. A properly reconditioned pump — inspected, reseated, with seals and bearings replaced to spec — can be a reasonable middle option if the work was actually done that way. Repairing your existing unit is usually the cheapest path when the housing and shaft are still sound and the failure is limited to wear parts. Sourcing it through Advance Hydraulic Works:- Advance Hydraulic Works operates as an importer and trader of hydraulic pumps and motors, not a manufacturer. For a coded part number like this one, the value on offer is accurate matching and verification before an order ships, not producing the part in-house. FAQs:- What does the “51“ in PVR50-51 mean? It's the pump's maximum displacement — roughly 51 cm³ per revolution — which sets how much oil it delivers per revolution at full stroke. Can I substitute a different displacement code if PVR50-51 isn't available? Not without checking your machine's original spec first. A different displacement changes flow output and can leave the machine under- or over-supplied. Should I buy new or refilled for this pump? It depends It depends on finances and how important the application is. Has a new cleanest warranty; A well refurbished unit can be reasonable if the drawings are actually up to spec. What do I need to send to the provider to get an accurate quote? The full part number read directly off the housing, ideally with a photo, rather than from an old order or parts list. Does Advance Hydraulic Works manufacture this pump? No — it sources and supplies genuine units as an importer and trader rather than manufacturing them in-house.
New Delhi
08042756439
+918527109985
Chat with us
Chat with us